Suitable for:
 - Ender 3 with 8 bit mainboard
 - Ender 3 Pro with 8 bit mainboard

Ender3-BLTouch-advanced-<date>.hex
 - No SD Card Support
 - Default probe offset for Creality BLTouch Mount - Change offset using M851 command and save to EEPROM with M500.
     Common offsets:
       - Petsfang Left - M851 X-48 Y-10 Z-2
       - Petsfang Right - M851 X+48 Y-2 Z-2
 - High Speed BLTouch Profile
 - Increased max hotend temp to 285c. Use caution above 250c.
 - Linear Advance Enabled - Use this tool to calibrate. Use this video as a guide.
 - Adds S-Curve Acceleration - See #14728
 - Adds Adaptive Step Smoothing
 - Adds G2 / G3 Arc support
 - Adds G10 / G11 Firmware based retraction (Use M207, M208, M209 to configure)
 - Adds M125 - Park Head
 - Adds M600 - Filament Change
 - Slim Menus
 - FAN_SOFT_PWM enabled to remove fan coil whine of high flow fans
 - Added support for Meatpack (2020-01-27 onwards)

commit 66474f6a1320c8e669a98e699eb819e1c8dd012b
Author: thinkyhead <thinkyhead@users.noreply.github.com>
Date:   Sat Jul 12 06:09:26 2025 +0000

    [cron] Bump distribution date (2025-07-12)

commit 4f0329bb43aed240468d935db8cf2e452c67080f
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Fri Jul 11 20:50:47 2025 -0500

    📝 Update links to Fysetc Mini12864_Panel